{How much yarn do I need?} Threipmuir by Ysolda Teague

Threipmuir  stranded yoke sweater pattern by Ysolda Teague

Threipmuir stranded yoke sweater pattern by Ysolda Teague

Threipmuir is a beautiful stranded knitting yoke sweater designed by Ysolda Teague. This sweater features a colorful collar and chest area using three shades of fingering weight yarn. Ewe Ewe’s Fluffy Fingering merino would work perfectly for this sweater and I’ve gone ahead and figured out how many skeins of each color you’d need to knit it.

Fluffy Fingering Yarn Amounts

Sizes: 36 (38, 40, 42, 44) [46, 48, 50, 52] (54, 56, 58, 60)" finished chest circumference

MC: 6 (6, 6, 6, 7) [7, 7, 7, 8] (8, 8, 8, 9) skeins of Fluffy Fingering yarn

CC1: 1 skein of Fluffy Fingering yarn

CC2: 1 skein of Fluffy Fingering yarn

Get the pattern here.

See the yarn here or visit a Ewe Ewe yarn shop near you!

Color combination ideas

I put together a few color combination ideas above. Take a minute to browse through the images to see if there’s a combination you love. You can always pick your own, too! See Fluffy Fingering yarn >

If you have any questions about choosing a color you can always send me an email. Happy knitting!


Do you want to knit Threipmuir with me?

Have you been eyeing all the beautiful yoke sweaters on Ravelry lately?

Me too!

Thriepmuir  yoke sweater by Ysolda Teague

Thriepmuir yoke sweater by Ysolda Teague

I think Threipmuir by Ysolda Teague is so simple and pretty in its design. This sweater would work perfectly in our new Fluffy Fingering merino yarn and we can have so much fun with the color combinations!

Let me know! Answer our quick survey:

Will you knit Threipmuir with me? *
Name *
Name

Let me know above if you’d enjoy knitting this with me! I’ll provide instructions and tutorials for each major step throughout the sweater, and I’ll be here for any questions you might have along the way.

I hope you’ll join me!

💗 Heather

Double the Fun KAL: Guildentern Stripes Sections 2 and 3

Ok - who had fun with the stripes this last week? I loved it! There’s something insanely satisfying about knitting stripes in the round. Maybe it’s the color change every 2 rows? I dunno… just keeps me super motivated to keep knitting those lovely little stitches.

Continuing with Stripes 2 and 3!

This week might feel a bit like last week when you get started but I promise that there’s a new step or two involved that will keep you hopping! So we’ll start out by breaking Color D and joining Color C and start knitting the Section 2 stripes.

BUT! Before you get too far along, we have to start looking ahead to the armholes. Remember week 1 when we talked about measuring gauge? Well, today we’re going to go back to our Row Gauge and do a wee bit of math to make sure our armholes are the right height!

 Step 1: Grab page 1 of the pattern that has the schematic on it. We’re looking for the height of “C” - the armhole depth.

Step 2: Work out how many rows it will take you to knit the height of the armhole. As an example: my armhole depth (for size 42) is 7.5”. My row gauge is 36 rows / 4”. So, the math on this is as follows:

  • 7.5” divided by 4” = 1.875
  • 1.875 multiplied by 36 rows = 67.5
    • (I’m going to round that up to 68 rows since we want an even, whole number).

Step 3: Now that we know how many rows we need to reserve for the armhole, we need to subtract those rows from the total length of Stripe Section 2 and 3 (starting with 3). Here’s how I math’d it out:

  • Stripe Section 3 for my size = 52 rows (13 repeats of 4 rows = 52 rows)
  • 52 rows minus 68 rows required for the armhole depth = -16 rows
  • Since I have negative rows on Stripe 3 it means that I have to make those 16 rows up in Stripe Section 2:
    • 52 rows of Stripe Section 2 minus 16 rows leftover = 36 rows. This means that I can work 36 rows of Stripe Section 2 in the round before we need to divide for the sleeves!

TIP TIME!

If you purchased a sweater kit from Ewe Ewe Yarns that only has 1 skein of yarn for Color D, I recommend weighing and splitting the skein! When we complete our Front half of the armhole, you won’t want to break the yarn to work the Back. So, divide that single skein into two even-weight skeins so you can work the Front and Back autonomously.

 

Dividing Front and Back for Armholes

Dividing for the sleeves: Front (left), back (unworked, right)

Dividing for the sleeves: Front (left), back (unworked, right)

Once you have completed your number of rows to work for Stripe Section 2 it’s time to divide for the armholes. To do this is really quite easy:

Step 1: Remove the beginning of round marker. Knit to next marker (do not slip any stitches).

Step 2: Remove the mid-round marker. Place the remaining stitches that will make up the Back of the armhole on a secondary needle or length of smooth waste yarn.

Step 3: Turn your work and purl the wrong side (WS) of the Front. From this point forward, the rest of the garment will be worked flat! Continue to carry your colors loosely up the edge of the work while striping!

Work your remaining rows for the Front of the garment. Through to the end of Stripe Section 3. Break Color C.
Do not break Color D and do not work the Neckline.

 

Knitting the Back / Back Armhole

When it’s time to work the Back / Back of the armhole, we will need to rejoin our working yarn and work in the same striping pattern as for the Front. When you get to Stripe Section 3, use the 2nd skein (or second half of 1 skein) of Color D. I found it far easier to work with separate skeins for the Neckline, which we’ll be working next week!

Place the held stitches from the Back onto your working needle. To rejoin the working yarn, grab the first color you’ll need to knit across the back and knit into the first stitch with the RS facing.

Knit across the row, turn the work and purl back on the WS to create your 2-row stripe. Continue to work the Back as you did the Front, ending with your Color C stripe to complete the Stripe Section 3. Break Color C. Do not break Color D and do not work the Neckline.

Front and back complete, divided for armhole

Front and back complete, divided for armhole

 

Noble Goals!

To stay on track with our original schedule, the goal of this week is to complete Stripe Sections 2 and 3 as per above, being sure to separate the work for the sleeves. However! Next week is a light week of working the Neckline and Shoulders only (so you can try the garment on - woot!) so if you need a bit of extra time to catch up, this week and next are the weeks to do it! Have so much fun!!!

 

Check in, encourage others, have fun!

Heather and Meaghan are here to answer any questions you might have about the Guildenstern shirt! We hope you're having fun with us on this summertime knitting adventure!

We'll check in online on Instagram with the hashtags #DoubleTheFunKAL and #EweEweKAL. Follow @eweeweyarns and @notsorryknitter on Instagram now! 

Email us if you have any questions! (We're just a click away.)

 

Double the Fun KAL: Guildenstern Joining in the Round and Striping

Alrighty Team Guildenstern! How did we do with Week 1? Did you have fun swatching in the round a la speed swatching? It’s my favorite wizarding moment to share with knitters. When I learned it from the inestimable Mary Jane Mucklestone my mind was completely blown! I hope you loved adding it to your little back of techniques!

Joining to work in the round

It’s one thing to cast-on a bunch of stitches and join to work in the round, say, like when making a hat. But I always find it a bit of a mental conundrum when I’m joining to work in the round after I’ve worked two pieces flat. I mean… they’re flat. There are tails everywhere. What the heck, man?

Ready to join Color B

Ready to join Color B

So, I’ve broken down each step and thankfully, because we’re using a new color to join in the round, it’s kind of color coded. Let’s get to it!

Step 1: Starting with the RS of the FRONT hem facing, and using your LARGER needle, join Color B and knit across the row.  

Make sure the needle in your right hand is the Large needle!

Make sure the needle in your right hand is the Large needle!

Step 2: When you get to the end of the Front hem, place a marker. Pick up the Back hem and with the RS facing you, continue to knit across the Back hem using Color B.

The front hem is shorter and is on the right, the back hem is on the left. 

The front hem is shorter and is on the right, the back hem is on the left. 

Step 3: When you reach the end of the Back hem, place a beginning of round (BOR) marker. I recommend that this marker be distinct from the marker you placed in Step 2. If they’re adorable hippo and dino markers, so much the better!

And that’s it! You’re officially joined to work in the round.

Be sure to use a distinct marker for BOR (beginning of round).

Be sure to use a distinct marker for BOR (beginning of round).

Jogless Stripes

This garment was originally designed to be worked flat, and I know exactly why! When working stripes in the round, because knitting is stacked like a coil or spring, our stitches tend to “jog” at the end of each round. Here’s an example of my mum, a newbie knitter, working on a simple striped cowl. It’s pretty obvious, right? She hasn't done anything wrong - it's the nature of knitting stripes in the round. I'll have to teach her about jogless stripes... 

Stripes doing their jog-thing!

Stripes doing their jog-thing!

A number of years ago I wrote a blog post about how simple jogless stripe modifications can be. In this garment, because we’re working in 2-row stripes, its even simpler.

Rnd 1: Knit.

Rnd 2: Slip 1 st purlwise with yarn in back, knit to 1 st before next marker, sl 1 st purlwise with yarn in back, slip marker, knit to end of round.

The first stitch that we slip on Rnd 2 will create a minor distortion by stretching that stitch vertically so that its the height of two rows. That puts enough tension on the fabric to pull up any “jog” between the beginning of Rnd 2 and the end of Rnd 2 so that the color change looks seamless.

So! Using the colors as per the pattern and continuing to work each color in 2-row stripes, work as per Rnd 1 and Rnd 2 above to continue the jogless stripe effect all the way up the sides of the project.

Look, Ma! No jogs! 

Look, Ma! No jogs! 

You might have noticed we work a second slipped stitch on the round? Yep. We’re going to do this for 2 reasons:

  1. The slipped stitches stacked on top of each other at the beginning of the round create a minor shortening of that column of stitches. We want to mimic that shortening on the other side of the garment so one side of the shirt isn’t longer than the other.
  2. Visually, that column of slipped stitches also creates a faux-seam. Since I like symmetry in my garments it’s a great little detail to add the faux-seam to both sides of the shirt.

Carrying Colors Up!

The other beauty of working this garment in the round rather than flat, is our ability to carry our two colors of yarn up the inside of the project. Of course, you can always carry colors up the edge of a flat piece of knit fabric, too, but I happen to think it’s just easier and faster when worked in the round.

To do this, at each color change, simply bring the new color loosely up the inside and behind the new color. Behind? Maybe “to the right” makes more sense? Essentially you want to make sure you’re always twisting the yarn the same way. And when you knit the first stitch of the next round it “traps” the old color and locks it in place for the next color change.

TIP! Be sure you carry the colors loosely enough that the fabric will still lay flat and doesn’t pucker or curl.

IMG_1256.jpg

Noble Goals!

This week your goal will be to join your work in the round and complete the Stripe Section 1. Next week we’re going to get a bit fancy and talk about sleeve depth and working in the round AND flat. Have a great week of knitting!

IMG_1252.JPG

Check in, encourage others, have fun!

Heather and Meaghan are here to answer any questions you might have about these projects and how a knit-along works. We hope you'll join us on this summertime knitting adventure!

We'll check in online on Instagram with the hashtags #DoubleTheFunKAL and #EweEweKALFollow @eweeweyarns and @notsorryknitter on Instagram now! 

Email us if you have any questions! (We're just a click away.)


Double the Fun KAL: The Shift is moving along

the_shift_section_2_a.jpg

Hello from Ewe Ewe land! How is your cowl coming? I am in love with mine. I don't know what it is about this Teal and Pistachio combo that has me swooning but I can't believe I haven't done it before!

This was a fun section but not too different from Day 1. We're going line by line increasing each RS row. We started in the back at the seam edge that will eventually be at the back of the neck. The beautiful edge at the top is the neckline and I just rounded the corner and started working the bottom edge that will mimic the neckline. I can't wait to see where we go from here!

More projects!

I love to see your projects as they're growing. Instagram is an easy way to post them but if you don't use it then go ahead and send me an email at heather@eweewe.com!


Check in, encourage others, have fun!

Heather and Meaghan are here to answer any questions you might have about these projects and how a knit-along works. We hope you'll join us on this summertime knitting adventure!

We'll check in online on Instagram with the hashtags #DoubleTheFunKAL and #EweEweKALFollow @eweeweyarns and @notsorryknitter on Instagram now! 

Email us if you have any questions! (We're just a click away.)


Double the Fun KAL: Guildenstern Swatching and Hems

Happy first day of the Double the Fun KAL, Guildenstern edition! I hope you’re as excited as I am to make this adorable shirt by Cory Ellen Boberg! I chose to go with the Spruced Up color combo and can't wait to wear it this summer!

The first week of our KAL is a lot of housekeeping: designating colors, choosing size, swatching and measuring for gauge. So, let’s jump right in and get down to the business of making a fabulous shirt that fits!

Color Order!

When I think about the order of colors I think “Ok, lightest at the top, darkest at the bottom” so lightest color is Color A and darkest color is Color D. NOPE! It’s the reverse. Since this top is worked from the bottom-up, we need to make sure our darkest color is Color A. I found it helpful to grab a Sharpie actually write “Color A”, “Color B”, etc. on the ball band of each skein.

IMPORTANT! Cory makes specific note in the pattern to use Color D to swatch. Please be sure you know which color is your Color D and use that to knit up your swatch to avoid running out of yarn in the other colors!

Spruced Up Kit: Vanilla (D), Soft Sage (C), Pistachio (B) and Teal (A)

Spruced Up Kit: Vanilla (D), Soft Sage (C), Pistachio (B) and Teal (A)

Choosing a Size

You likely already have your yarn (though if you don't, there's still totally time to join us) - which means you probably have a general idea about the size of garment you plan to make. BUT! If you’re on the fence about sizing here’s a tip I offer to anyone who asks:

Go into your closet and find your most favorite garment - preferably knit, if possible. You know which one I’m talking about: the one that you’re always happy to see is clean, the one that you feel like a total Rockstar when you wear it. THAT one!
Lay it flat on a non-stick surface, like a countertop or kitchen table, not a bed or sofa that can “stick” to the fabric, and measure the dimension across the bust of the garment. Make the size of Guildenstern based on that!

As an example, I’m a 40.5” bust and one of my favorite favorite shirts measures 41.75” (the dimension across the bust when laid flat is around 20-7/8” - half of the total circumference). Now, obviously the top doesn’t come in quarter sizes, only full sizes every 2”, so I’m going to knit the size closest which comes in at 42”. Pretty perfect!

Let’s Talk Swatching ITR!

Before we get started with the knitting, I want to talk about swatching for gauge when working in the round (ITR). I know lots of knitters who will swatch flat for knitting in the round. I have BEEN one of those knitters. Lemme tell ya… it didn’t work out so well for the finished garment fitting me so I’m here to share my favorite knitting tip: SPEED SWATCHING!

Alright, so "speed swatching" it’s a bit of a misnomer based on the fact that you don’t actually knit any faster, but you can create a gauge swatch that is appropriate for measuring gauge in the round faster than if you did it the traditional way: casting on an entire tube and knitting the whole thing.

Here’s a video tutorial on how to knit a speed swatch for this project since we’re going to be working this in the round once the hems are complete.

How to Measure Gauge

Once your swatch is dry, dry, dry, it’s time to measure your gauge so you know that your finished garment will fit.

I’m going to refer to you to a handy-dandy blog post that Heather shared back in May when she hosted another knit along with a few reminders/tips:

  1. Be sure to use Color D!
  2. Use a needle size that is close to the size you estimate you’ll need for this project. Cory calls for a US 6 in the pattern. I know from experience with Ewe Ewe Yarns that to get 24 sts / 4” using a sport weight yarn I need to go down a needle size or two. I swatched using my US 4 needle and am bang on 24 sts / 4”. If you don’t know, start with a US 6. If you swatch a couple of inches (pre-blocking) and measure and you’re already getting fewer stitches per inch, go down a needle size and restart.
  3. Cast on at least 30 sts (Heather’s blog post calls for 20 but they were using a Bulky-weight yarn). You want to make sure you have a good sample to take your gauge over.

Ok, with that said, head on over to Heather’s previous blog post about measuring your stitch gauge by clicking HERE.

Choosing Needle Sizes

Once you have determined your gauge for your Larger needle size, you'll need to determine what your Smaller needle size is (if you didn’t get gauge on at US 6).

My first assumption was to go down 3 needle sizes as per Cory’s pattern, however, after some trial and error on my part, I decided it was best to go down the metric number of sizes, as closely as possible.

For example, you’ll notice that Cory uses a US 6 (4 mm) for the Larger needle and her Smaller needle is a US 3 (3.25 mm). That’s a metric diameter difference of 0.75 mm. So I highly recommend just going down the 0.75 mm in size rather than 3 needle sizes.

  • If you’re using a US 6 for your Larger needle, obviously use a US 3 for your Smaller needle.
  • If you’re using a US 5 for your Larger needle, I would still recommend using a US 3 for your Smaller needle. Going down to a US 2 would be too small compared to your Larger needle gauge.
  • If you’re like me and need to use a US 4 to meet gauge, go down to a US 2 (2.75 mm) needle to get the 0.75 mm diameter difference.

Casting On!

Whew! That felt like a lot of work just to get to the magical part of casting on. But we’re finally there!

For week 1 (that's today!) we’re going to work the Cast On - Front and Back using our Smaller needles, exactly as Cory has it written. Mostly!

TIP TIME! I highly recommend knitting the Back hem first. You can work the back Hem, and break the yarn then work the Front hem leaving the working yarn attached for joining in the round next week.

If you don’t have 2 needles of the same size you can knit the Back hem and place the stitches on a stitch holder or length of smooth waste yarn while you work the Front hem. You’ll be able to tell the difference between the two because the Front is shorter than the Back. Next week we’ll talk about joining the Front and the Back and working the shirt in the round (so much faster!).

Hems.jpg

Until next week...

Week 2 of the Guildenstern edition of the Double the Fun KAL will be next Thursday, July 26th where we'll tackle joining in the round and Body Stripes Section 1. But before I sign off the blog post for the week, I have two more tips for you as you get those busy little fingers a-knittin’!

  1. Grab a highlighter or red pen and go through the pattern and highlight or circle your size of instructions throughout the pattern. It’ll make the process moving forward a lot easier - far less counting each set of instructions to get your size.
  2. Clip a removable marker to the RS of your garter stitch hems. You’ll notice that in the instructions Cory says “Beginning with WS facing” - so you’ll want to make sure you know RS from WS so that when you start the Body you’ve got the correct side of the garter ridges facing you!

Noble Goals!

This week your goal will be to swatch, measure your gauge and knit the Front and Back hems.

Next week we’re going to start working the shirt in the round so be sure you have a 32” circular needle with which to join the work and a couple of stitch markers. Have a great week of knitting!


Check in, encourage others, have fun!

Heather and Meaghan are here to answer any questions you might have about these projects and how a knit-along works. We hope you'll join us on this summertime knitting adventure!

We'll check in online on Instagram with the hashtags #DoubleTheFunKAL and #EweEweKALFollow @eweeweyarns and @notsorryknitter on Instagram now! 

Email us if you have any questions! (We're just a click away.)